Woodpecker Yushili Negative Ion Jade Paint

Product: Yushili Negative Ion Jade Paint

Model: YSQ6191-CK

Consumption: 0.15kg-0.2kg/square meter
Packaging Specifications: 20kg/barrel; 25kg/barrel
【Scrub Resistance Cycles】Compliant with National Standards

Product Brief：

Woodpecker Yushili Negative Ion Jade Paint has obtained invention patent technology. It is made from natural jade powder, diatomite and other minerals, odor-free additives, and bamboo charcoal components. It is especially suitable for interior wall decoration of high-end residences, office buildings, hotels, villas and other premises.

Woodpecker Jade Paint has obtained the National Invention Patent of China (Invention Patent No.: ZL 2012 1 0531761.0). It is made from natural minerals such as jade powder and diatomite, along with odor-free additives and bamboo charcoal components.
Not only does it have a fresh odor, but it also effectively and continuously releases negative ions—achieving a concentration of over 1,000-2,000 negative ions per square centimeter in the air.
With remarkable advantages including ultra-long weather resistance, resistance to environmental pollution, and an extended service life, it is widely used in building coating fields that are difficult to maintain, such as high-rise buildings, large public buildings, and structures in harsh application environments. Its ultra-long durability helps reduce the "life cycle cost" of buildings and decrease the frequency of repainting, thereby minimizing environmental impact.

Odor-free formula with bamboo charcoal for odor removal

Contains natural jade powder, diatomite and other minerals

Mildew and alkali resistance, with long-lasting bright appearance

Excellent leveling property, dense and smooth paint film

Superb hiding power and scrub resistance

Technical Specifications

Gloss: Matte

Recommended Optimal Coating System:

Primer: 1 coat of Woodpecker Negative Ion Primer
Topcoat: 2 coats of Woodpecker Yushili Negative Ion Jade Paint

Construction Instructions:

1.Before construction, ensure the wall humidity is less than 10% and the pH value is less than 10. For new walls, the putty layer should be applied with high-end multi-functional waterproof interior wall putty, then sanded smooth with 400-mesh sandpaper and dust-removed before construction. This ensures the optimal paint film effect.

2.For old wall renovation, ensure the wall is free of oil stains and loose materials. Remove cracked old paint film, fill defects with appropriate putty, sand smooth, remove dust, and then proceed with construction according to the process.

3.Use high-quality construction tools. New wool brushes should be cleaned with a suitable detergent to remove grease before use. Rollers must be used with a matching tray, and high-quality short-pile rollers are recommended.

4.Stir the paint thoroughly and filter before use. Keep the barrel lid tightly closed during construction intervals to prevent skinning. Do not pour diluted paint back into the original container.

5.The recoating interval should be at least 2 hours (at 25°C, subject to touch-dry condition). In winter, the recoating interval should be appropriately extended.

6.Do not construct when the temperature is below 5°C or the relative humidity exceeds 85%.

7.When applying dark or bright-colored products, strictly control the dilution ratio within 20% and appropriately increase the number of coats to ensure the best effect.

Storage Instructions:

This product is an eco-friendly water-based coating. It should be stored in a cool and dry place with the temperature controlled between 0°C and 25°C. Avoid direct sunlight or low-temperature storage.

Warm Tips

1.To ensure the best coating effect, use Woodpecker Paint Industry’s matching primer and rollers during construction.

2.Be sure to read the construction instructions on the product packaging carefully before use to achieve reliable and satisfactory coating results.

3.If the paint accidentally gets into the eyes, rinse immediately with plenty of clean water and seek medical help.

Dilution Ratio

Brushing/Rolling: Add 10%-20% clean water

Airless Spraying: Add 5%-20% clean water

Construction Methods:Brushing, Rolling, Airless Spraying

Theoretical Paint Consumption:4-7 square meters per kg per coat (actual consumption may vary depending on the roughness of the base and construction process)