Woodpecker Clinique Beauty Bamboo Charcoal 2-in-1 Wall Paint

Product:  Clinique Beauty Bamboo Charcoal 2-in-1 Wall Paint

Model:  ZMN6024-CK

Specification:  20kg/barrel; 25kg/barrel

Consumption:  0.15kg-0.2kg/square meter

【Scrub Resistance Cycles】Compliant with National Standards

Product Brief：Based on its full-range functions, Woodpecker Clinique Beauty Bamboo Charcoal 2-in-1 Wall Paint specially adds "natural active bamboo charcoal factors" and is combined with "high-efficiency formaldehyde removal technology". It comprehensively captures and purifies formaldehyde, benzene, and various harmful substances floating in the air, keeping indoor air fresh and natural, creating a natural and pure space, and protecting the health of family members in a more all-round way.

Product Features

1.Purifies indoor harmful substances such as formaldehyde, benzene, and VOCs, and cleans the air

2.Superb antibacterial, mildew-resistant, stain-resistant, and alkali-resistant properties

3.Excellent scrub resistance, with stronger breathability and waterproof function

High flexibility

4.Fine and smooth paint film, easier to apply, and long-lasting bright appearance

Higher hiding power, capable of covering small cracks

Technical Specifications

Gloss: Matte

Construction Methods: Brushing, Rolling, Airless Spraying

Dilution Ratio:

Brushing/Rolling: Add 10%-20% clean water

Airless Spraying: Add 5%-15% clean water

Theoretical Paint Consumption: 8-10 square meters per kg per coat (actual consumption may vary depending on the roughness of the base and construction process)

Recommended Optimal Coating System

Primer: 1 coat of Woodpecker All-Purpose Alkali-Resistant Sealing Primer

Topcoat: 2 coats of Woodpecker Qianbi Mei Bamboo Charcoal 2-in-1 Wall Paint

Construction Instructions

1.Before construction, ensure the wall humidity is less than 10% and the pH value is less than 10. For new walls, the putty layer should be applied with high-end multi-functional waterproof interior wall putty, then sanded smooth with 400-mesh sandpaper and dust-removed before construction. This ensures the optimal paint film effect.

2.For old wall renovation, ensure the wall is free of oil stains and loose materials. Remove cracked old paint film, fill defects with appropriate putty, sand smooth, remove dust, and then proceed with construction according to the process.

3.Use high-quality construction tools. New wool brushes should be cleaned with a suitable detergent to remove grease before use. Rollers must be used with a matching tray, and high-quality short-pile rollers are recommended.

4.Stir the paint thoroughly and filter before use. Keep the barrel lid tightly closed during construction intervals to prevent skinning. Do not pour diluted paint back into the original container.

5.The recoating interval should be at least 2 hours (at 25°C, subject to touch-dry condition). In winter, the recoating interval should be appropriately extended.

6.Do not construct when the temperature is below 5°C or the relative humidity exceeds 85%.

7.When applying dark or bright-colored products, strictly control the dilution ratio within 20% and appropriately increase the number of coats to ensure the best effect.

Storage Instructions

This product is an eco-friendly water-based coating. It should be stored in a cool and dry place with the temperature controlled between 0°C and 25°C. Avoid direct sunlight or low-temperature storage.